派克PARKER電動執行器HPLA080 派克電動執行器* HPLA 080 BELT DRIVEN, ROLLER WHEEL, RODLESS LINEAR ACTUATOR HPLA080 actuators incorporate a high strength timing belt, guided by low friction, heavy-duty roller wheels, inside a sealed housing. With load capacity to 3000N and speeds up to 5m/s, HPLA080's are optimized for high speed, single or multi-axis systems

The HPLA series of linear actuators is an extremely rugged and industrially hardened linear actuator that offers high speed, high acceleration, and long travel lengths, combined with a stiff, rigid construction. It is ideally suited for use in either single axis configurations or high speed, multi-axis gantry systems.  The HPLA carriage is rigidly supported on three sides by heavy duty, roller bearings housed inside of a rugged aluminum housing. The bearing wheels are pre-loaded to eliminate play in the system and strategically located along the carriage to evenly distribute load across the length of the carriage.                

The HPLA's high strength, steel reinforced belt and pulley system provides fast, highly repeatable positioning of the carriage. The HPLA utilizes over-sized pulleys which allow the it to provide very high levels of thrust output relative to the profile size. The mounting of the belt to the carriage is designed to enable easy replacement of the belt without the need to remove the payload, while simultaneously providing a very rigid connection. Having a low coefficient of friction, the carriage design provides a high mechanical efficiency and long service life. Special carriage lengths and linear units with multiple carriages are available for custom applications.  

HPLA080 Belt Driven, Roller Wheel, Rodless Linear Actuator Features:
• Profile Width : 80mm
• Steel roller bearing option for higher load capacities up 3023N
• Thrust force capacities up to 1115N
• Standard travel up to 5540mm (longer strokes available - consult factory)
• Velocity up to 5 meters/sec
• Positional repeatability of +/- 0.2mm
• Rugged construction for heavy duty applications
• Timing belt and pulley drive mechanism for fast, accurate positioning
• Seal Strip (IP30) for additional environmental protection 
• Low wear and low particle generation (clean room suitable to class 100)
• T-slot mounting along actuator body and carriage

派克PARKER電動執行器HPLA080 派克電動執行器* 性能特點
系列 HPLA
輪廓寬度 (MM) 80
傳動類型 Belt
軸承類型 Roller Wheel - Polyamide (Steel option for high load)
zui大行程 (MM) 5540 (single profile) / 20000 (max by splicing)
zui大行程 (IN) 218 (single profile) / 787 (max by splicing)
zui大速度 (M/S2) 5
zui大速度 (IN/S) 200
zui大加速度 (M/S2) 10
zui大加速度 (IN/S2) 393
zui大推力 FX (N) 1115
zui大推力 FX (LBS) 251
典型有效載荷 FZ (N) 100 - 3023
zui大有效載荷 FZ (N) 1656 (Polyamide) | 3023 (Steel)
位置重復性 (+/- MM) 0.2
位置重復性 (+/- IN) 0.008
惰輪裝置選件 Yes
其他保護選項 Steel Strip Cover
耐腐蝕選件 Yes (stainless steel)
證書 Cleanroom Certified (up to Class 100 / ISO Class 5)
線性回饋設備 Optional
派克PARKER電動執行器HPLA080 派克電動執行器* 東莞市巴菲特自動化設備有限公司經銷
：



：
：

：523000
地址：廣東省東莞市南城區宏遠1號宏酒店商務樓14樓13A11